how to make speaker box

2021-12-29 0 Comments

how to make speaker box插图

Best answer


Here’s what to do:Purchase six wood boards. …Measure and cut the boards so …Measure the face of your speak …Screw the speaker driver to th …Cut the black speaker cloth to …Drill holes in all the boards. …Screw a brace to the inside of …Fill the box with insulation. …Make a hole in the back panel …Thread the wires through the h …鏇村缁撴灉…

People also ask


  • Can you build your own speaker box?

  • Listening to great sound doesn’t have to come at a great price. With just a few materials, you can build a box to house your speakers with sound quality as good as anything you might buy. Follow the steps listed below and build your own speaker box.

  • How do you make a speaker box out of MDF?

  • Sand all rough edges. Brace the speaker box with 1-inch x 1-inch (2-1/2 cm x 2-1/2 cm) strips of wood (battens). Cover 60 percent of each interior edge with a batten. Screw the batten into the MDF. Fit the cut pieces together to make sure they match up. Pre-drill all holes and bead carpenter鈥檚 glue along each joint as you assemble the box.

  • What size cardboard do you use for speaker boxes?

  • Corrugated cardboard is much better than single ply cardboard. A small box will tend to have more structural rigidity than a large box, so err on the side of small. If you’re using a speaker smaller than 6 inches across, use a box that is roughly an 8- to 9-inch cube. Cut an opening in the side of the box large enough for the speaker.

  • How do you make a speaker out of cloth?

  • Glue the cloth to the edges of the board. Drill holes in all the boards. Screw five of the boards together, including the board with the speaker driver, creating a box. Leave the box open in the back. Screw a brace to the inside of each corner of the box. This makes the box sturdier and prevents the boards from shaking when the volume is high.