how to make a wooden box

2021-12-23 0 Comments

how to make a wooden box插图

Best answer


Before making a wooden box,choose some wood and gather your tools,including a hammer,nails,wood glue,and a saw. Then,measure your boards according to the size of the box you鈥檙e making,mark them,and cut them to size using the saw. Next,assemble the side pieces using wood glue and reinforce the sides with finishing nails.

People also ask


  • How do you make a simple box out of wood?

  • Lay one of the sides of your box face down on a table or flat surface. Take 2 of your 1鈥硏2鈥?support pieces and lay them against the outer edges of the wood like the picture below. Be sure to leave 1/4鈥?of space below them so there will be room to slide in the bottom at the end. Glue these down with wood glue.

  • How do you attach a wooden box to a wall?

  • Using wood glue on the 1鈥硏2鈥?supports, attach the two sides of the box to the front. Be sure to line up the edges carefully. Apply wood glue to the final supports as shown below and carefully attach the back piece. Once the glue dried, I also hammered four brads (small nails) into each side of the box.

  • How do you make a wooden box with a sliding lid?

  • Making a Wooden Box with a Sliding Lid Choose your wood. Gather your supplies. Measure and mark your boards. Cut your boards, if not already to size. Cut grooves into the side boards. Cut the front side of your box. Assemble the side pieces using a butt joint. Secure the sides to the base. Cut the groove for the lid. Fill any nail holes.

  • What is the best wood to use to make a box?

  • For example, if you’re making a jewelry box, consider thin pieces of cedar, ash or oak. It will be easier to make a smaller box with thinner wood. Save larger pieces or boards for bigger boxes. This will also prevent you from having to do too much trimming.